13.5-17.0/27.0-34.0 ghz doubler qfn, 3x3mm integrated gain, doubler and driver stages single positive supply, +5v integrated bypassing capacitor +20.0 dbm output saturated power 35.0 dbc fundamental suppression on-chip esd protection 100% rf, dc and output power testing 3x3 qfn package rohs compliant features electrical characteristics (ambient temperature t = 25 o c) parameter input frequency range (fin) output frequency range (fout) input return loss (s11) output return loss (s22) fundamental suppression rf input power (rf pin) output power at 8.0 dbm pin (pout) drain bias voltage (vd) supply current (id1,2,3) (vd=5.0v typical) units ghz ghz db db dbc dbm dbm vdc ma min. 13.5 27.0 - - -28.0 - +16.0 - - typ. - - -8.0 -10.0 -35.0 8.0 +20.0 +5.0 200 max. 17.0 34.0 - - - - - +5.5 240 absolute maximum ratings supply voltage (vd) supply current (id) gate bias voltage (vg) input power (rf pin) storage temperature (tstg) operating temperature (ta) channel temperature (tch) +6.0 vdc 300 ma +0.3 vdc 10 dbm -65 to +165 o c -55 to mttf table mttf table chip device layout page 1 of 6 1 (1) channel temperature affects a device's mttf. it is recommended to keep channel temperature as low as possible for maximum life. 1 x1007-qt mimix broadbands 13.5-17.0 / 27.0-34.0 ghz gaas mmic doubler integrates a gain stage, passive doubler and driver amplifier onto a single device. the xx1007-qt has a self-biased architecture requiring a single positive supply (+5v) only and integrated on-chip bypassing and dc blocking capacitors eliminating the need for any external components. this device uses mimix broadbands gaas phemt device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. xx1007-qt has integrated esd structures for protection and comes in a low cost 3x3mm qfn package. the device is well suited for millimeter wave point-to-point radio, lmds, satcom and vsat applications. general description mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
doubler measurements page 2 of 6 13.5-17.0/27.0-34.0 ghz doubler qfn, 3x3mm x1007-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10 xx1007-qt: pout at fin and 2x fin, pin = 10 dbm, vd = 5v -4 0 -3 5 -3 0 -2 5 -2 0 -1 5 -1 0 -5 0 5 1 0 1 5 2 0 2 5 1 3 13. 5 1 4 14. 5 1 5 15. 5 1 6 16. 5 1 7 inpu t fr e qu e n c y (gh z) ou t pu t p o w e r (dbm ) p o u t @ fi n p ou t @ 2 x f i n xx1007-qt: pout at fin and 2x fin, pin = 5 dbm, vd = 5v -4 5 -4 0 -3 5 -3 0 -2 5 -2 0 -1 5 -1 0 -5 0 5 1 0 1 5 2 0 2 5 1 3 13. 5 1 4 14. 5 1 5 15. 5 1 6 16. 5 1 7 inpu t fr e qu e n c y (gh z) ou t pu t p o w e r (dbm ) p o u t @ fi n p ou t @ 2 x f i n xx1007-qt: pout at fin and 2x fin, pin = 0 dbm, vd = 5v -3 5 -3 0 -2 5 -2 0 -1 5 -1 0 -5 0 5 1 0 1 5 2 0 2 5 1 3 13. 5 1 4 14. 5 1 5 15. 5 1 6 16. 5 1 7 inpu t fr e qu e n c y (gh z) ou t pu t p o w e r (dbm ) p o u t @ fi n p ou t @ 2 x f i n xx1007-qt: pout vs pin, v d = 5v, input frequency = 14.5 ghz 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 0 1 2 3 4 5 6 7 8 9 1 0 1 1 pin (dbm) pout (dbm ) pout xx1007-qt: pout vs pin, input frequency = 14.5 ghz 1 5 1 6 1 7 1 8 1 9 2 0 2 1 2 2 2 3 0 1 2 3 4 5 6 7 8 9 1 0 1 1 pin (dbm) pout (dbm ) pou t @ 5 v pou t @ 4 v xx1007-qt: pout at fin and 2x fin, pin = 3 dbm, vd = 5v -3 5 -3 0 -2 5 -2 0 -1 5 -1 0 -5 0 5 1 0 1 5 2 0 2 5 1 3 13. 5 1 4 14. 5 1 5 15. 5 1 6 16. 5 1 7 inpu t fr e qu e n c y (gh z) ou t pu t p o w e r (dbm ) pou t @ fi n p ou t @ 2 x fi n
doubler measurements (cont.) page 3 of 6 13.5-17.0/27.0-34.0 ghz doubler qfn, 3x3mm x1007-qt xx1007-qt: input return loss (s11) -1 8 -1 6 -1 4 -1 2 -1 0 -8 -6 -4 -2 0 5 1 0 1 5 2 0 2 5 3 0 3 5 4 0 fre que nc y (ghz) ret urn lo ss ( db) s11 @ 4 v s11 @ 5 v mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10 xx1007-qt: idd vs pin, input frequency = 14.5 ghz 10 0 12 5 15 0 17 5 20 0 22 5 25 0 0 1 2 3 4 5 6 7 8 9 1 0 pin (dbm) curr e n t , idd (ma ) idd @ 4 v idd @ 5 v xx1007-qt: idd vs input frequency, vd = 5v 12 0 13 0 14 0 15 0 16 0 17 0 18 0 19 0 20 0 21 0 22 0 23 0 24 0 25 0 26 0 1 3 13. 5 1 4 14. 5 1 5 15. 5 1 6 16. 5 1 7 inpu t fr e qu e n c y (gh z) curr e n t , idd (ma ) idd @ pin = 10 d bm idd @ pin = 5 d bm idd @ pin = 0 d bm xx1007-qt: input return loss (s22) -1 8 -1 6 -1 4 -1 2 -1 0 -8 -6 -4 -2 0 5 1 0 1 5 2 0 2 5 3 0 3 5 4 0 fr e qu e n c y ( ghz ) ret urn lo ss ( db) s 22 @ 4 v s 22 @ 5 v xx1007-qt: input return loss (s11) -1 8 -1 6 -1 4 -1 2 -1 0 -8 -6 -4 -2 0 1 3 13. 5 1 4 14. 5 1 5 15. 5 1 6 16. 5 1 7 fr e qu e n c y ( ghz ) ret urn lo ss ( db) s 11 @ 4 v s 11 @ 5 v xx1007-qt: input return loss (s22) -1 8 -1 6 -1 4 -1 2 -1 0 -8 -6 -4 -2 0 2 7 2 8 2 9 3 0 3 1 3 2 3 3 3 4 fr e qu e n c y ( ghz ) ret urn lo ss ( db) s 22 @ 4 v s 22 @ 5 v
functional block diagram pin designation physical dimensions page 4 of 6 13.5-17.0/27.0-34.0 ghz doubler qfn, 3x3mm x1007-qt pin number function typ. value unit 3 r f i n 5 d b m 10 rf out 2 0 dbm 13 vd 5 v nc nc 1 , 2 , 4 , 5 , 6 , 7 , 8 , 9 11,12,14,15,1 6 nc: no connection mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
rf in vd rf out page 5 of 6 mttf tables (tbd) evaluation board layout bias conditions: vd=5.0v, id=200ma these numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry. backplate temperature 75 deg celsius channel temperature 192 deg celsius fits 2.9 e+02 mttf hours 3.4 e+06 rth 126 c/w 13.5-17.0/27.0-34.0 ghz doubler qfn, 3x3mm x1007-qt mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
page 6 of 6 13.5-17.0/27.0-34.0 ghz doubler qfn, 3x3mm x1007-qt handling and assembly information ordering information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. the package is a low-cost plastic package. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) pb free processes. part number for ordering description xx1007-qt-0g00 matte tin plated rohs compliant qfn 3x3 16l surface mount package in bulk quantity xx1007-qt-0g0t matte tin plated rohs compliant qfn 3x3 16l surface mount package in tape and reel xx1007-qt-ev1 xx1007-qt evaluation board we also offer this part with alternative plating. please contact your regional sales manager for more information regarding different plating types. typical reflow profiles reflow profile ramp up rate activation time and temperature time above melting point max peak temperature time within 5 oc of peak ramp down rate snpb 3-4 oc/sec 60-120 sec @ 140-160 oc 60-150 sec 240 oc 10-20 sec 4-6 oc/sec pb free 3-4 oc/sec 60-180 sec @ 170-200 oc 60-150 sec 265 oc 10-20 sec 4-6 oc/sec c a u t i o n : e s d s e n s i t i ve appropriate precautions in handling, packaging and testing devices must be observed. proper esd procedures should be followed when handling this device. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
|
